|Home | Downloads | Screenshots | Forums | Source code | RSS|
melonDS aims at providing fast and accurate Nintendo DS emulation. While it is still a work in progress, it has a pretty solid set of features:
• Nearly complete core (CPU, video, audio, ...)
• OpenGL renderer, 3D upscaling
• RTC, microphone, lid close/open
• Joystick support
• Various display position/sizing/rotation modes
• (WIP) Wifi: local multiplayer, online connectivity
• and more are planned!
If you're running into trouble: Howto/FAQ
If you're feeling generous: melonDS Patreon
Aug 18th 2017, by Arisotura
The 3D renderer is being worked on, and for example, this is in the works:
I'll let you guess ;)
Work is also being put into figuring out the exact GPU algorithms. What has been done so far is a double bonus: not only is the renderer more accurate, it's also faster as a result of doing less divisions per pixel. The GPU takes shortcuts, so figuring them out allows for this kind of double-bonus optimization.
The buttons have dents in their borders, that are also visible on hardware. Those are caused by interpolation quirks. Artificially perfect interpolation will make the buttons look "perfect".
It's a tiny detail that likely doesn't matter to a whole lot of gamers, but as I said, I like figuring out the logic behind what I'm observing :P
Besides, it can't be bad to have an accurate renderer. You never know when a homebrew dev or ROM hacker may run into GPU quirks, but they may find about those more easily if they can reproduce the quirks on an emulator.
... read more
|14 comments (last by Ayaya) | Post a comment|
Aug 7th 2017, by Arisotura
So things have been quiet lately. My apologies for that, and I can assure you that melonDS isn't dead.
First thing is that real life is striking back. My current job is ending at the end of this month, and I need to finish their project (fresh new website) and put it live. Most of it is done already, but it takes time to check everything and ensure it's alright and looks nice and all. So this occupies my mind more.
I'm also busy with parts of the melonDS adventure that don't produce a whole lot of visual results. For one, I'm investigating interpolation, and once again we're into weird land.
Z interpolation, for example: the depth buffer is 24-bit, but in Z-buffering mode, interpolation suffers from precision loss at various stages. The output precision actually depends on the value range being interpolated over (the greater the difference, the bigger the precision loss).
W-buffering doesn't have these issues as it uses untransformed W values, and uses the regular perspective-correct interpolation path (while Z-buffering requires using special linear interpolation as transformed Z values are already linear into screen space).
Regular perspective-correct interpolation is weird too. It seems to apply correction to W values based on their first bit. I don't quite see what was intended there, if it was intended at all -- after all, it could just be a hardware glitch. But regardless, that causes slight differences that can have visible effects. It's generally a texture being one pixel off, so one would say it doesn't really matter, but I like figuring out the logic behind what I'm observing.
I also want to finally tackle the UI. melonDS has become a fairly solid emulator, but the current UI doesn't really reflect that.
I still haven't picked something to go with, though. I think I'll pick something lightweight, like byuu's hiro, and modify it to interoperate nicely with SDL. I'm not sure how well that can work across platforms, but ideally I would create a SDL window and add a menubar to it, rather than having two separate windows.
I'm also thinking about a buildbot type thing. People wouldn't have to wait for proper releases, but on the other hand, I fear it reduces or kills my incentive to do proper releases.
|16 comments (last by Lunos) | Post a comment|
Why there is no 32-bit build of melonDS
Jul 25th 2017, by Arisotura
The main reason is that I don't have an incentive to provide 32-bit builds. Most people already have 64-bit OSes.
That being said, melonDS can currently run on 32-bit platforms. It may be less performant, as the 3D renderer does a lot of 64-bit math, but it is still possible.
But if I ever decide to implement a JIT, for example, there will be no 32-bit version of it.
If you're stuck on a 32-bit OS for hardware reasons, your computer will not be fast enough to run melonDS at playable speeds.
melonDS will be optimized, it will run faster, but it will also tend towards more accuracy. So I can't tell how fast it will be in the end. But I highly doubt it will run well on a PC from 2004. Maybe it will, if a JIT is made, but that's not a high priority task.
If you are stuck on such hardware, NO$GBA is a better choice for you. Or NeonDS if you don't mind lacking sound. Or hell, the commonly mentioned method of running DraStic in an Android emulator -- those who bash DeSmuME at every turn claim it's fast.
Truth is, emulating the DS is not a walk in the park. People tend to assume it should be easy to emulate fast because the main CPU is clocked at a measly 66MHz. Let's see:
There are two CPUs. ARM9 and ARM7, 66MHz and 33MHz respectively. Which means you need to keep them more or less in sync. Each time you stop emulating one CPU to go emulate the other (or to emulate any other hardware) impacts performance negatively, but synchronizing too loosely (not enough) can cause games to break. So you need to find the right compromise.
The ARM7 generally handles tasks like audio playback, low-level wifi access, and accessing some other peripherals (power management, firmware FLASH...). All commercial games use the same ARM7 program, because Nintendo never provided another one or allowed game devs to write their own. This means that in theory the ARM7 could be emulated in HLE. In practice, this has never been attempted, unless DraStic happens to do it. It's also worth noting that it would be incompatible with homebrew, since they don't use Nintendo's ARM7 program.
... read more
|10 comments (last by Carl) | Post a comment|
melonDS 0.4 -- It's here, finally!
Jul 16th 2017, by Arisotura
melonDS 0.4 was long awaited, and finally, it's here!
So here's a quick rundown of the changes since 0.3. I'm keeping the best for the end.
The infamous boxtest bug that plagued several games has finally been fixed. The bug generally resulted in missing graphics.
The boxtest feature of the DS lets you determine whether a given box is within the view volume. Several games use it to avoid submitting geometry that would end up completely offscreen. A prime example would be Nanostray, which uses it for everything, including 2D menu elements that are always visible.
Technically, you send XYZ coordinates and sizes to the GPU, which calculates the box vertices from that. The box faces are then transformed and clipped like regular geometry, and the test returns true if any geometry makes it through the process (which would mean that it appears onscreen). This also means that the result will be false if the view volume is entirely contained within the box.
I had no idea where the bug was, as melonDS did all that correctly, and some tests with the libnds BoxTest sample revealed nothing. It turned out that the issue lied within the initial calculation of the box coordinates. When melonDS calculated, say, "X + width", it did so with 32-bit precision. However, the hardware calculates it with 16-bit precision, so if the result overflows, it just gets truncated. And, surprise, games tend to rely on that behavior. Getting it wrong means you end up testing a different box, and getting different results. Hence the bug.
There have been various other improvements to the 3D renderer. Things have been revised to be closer to the hardware.
As a result, the Pokémon games look nicer, they don't have those random black dots/lines all over the place anymore. The horrendous Z-fighting observed in Black/White is also gone.
... read more
|11 comments (last by AsPika2219) | Post a comment|
Nightmare in viewport street
Jul 5th 2017, by Arisotura
And another bug bites the dust... a quite old one, by the way.
Namely, it was reported two months ago in issue #18: missing character models in Homie Rollerz's character select screen. Actually, if you look closely, you can see they were there, but they got compressed to one scanline at the top, which was caused by a bug in the viewport transform.
In 3D graphics terms, the viewport defines how normalized device coordinates of polygons are transformed to screen coordinates, which can be used to render the polygons.
Most games specify a standard fullscreen viewport, but there are games that pull tricks. Homie Rollerz is one of them, the character select screen uses a 'bad' viewport. But, unlike high-level graphics APIs, the DS has no concept of bad viewport. You can input whatever viewport coordinates, it doesn't reject them or correct them.
So how does it behave? Well, if you've been following this, you surely know that the DS looks normal and friendly on the surface, but if you look deeper, you find out that everything is weird and quirky. Viewports are no exception.
That's why the bug stayed unfixed for so long. GBAtek doesn't document these cases, so it's a matter of running hardware tests, observing results, and doing it again and again until you figure out the logic.
For example, here's a test: the viewport is set to range from 64,0 to 128,192. Nothing special there.
Now, we change the viewport to range from 192,0 to 128,192, which results in a width of -64 (which, by the way, OpenGL would reject). One would say that such a viewport results in graphics getting mirrored, like this:
... read more
|4 comments (last by huckleberrypie) | Post a comment|
To make it clear
Jun 21st 2017, by Arisotura
There is no Patreon version of melonDS. There will never be such a version.
Donating doesn't entitle you to anything. Not donating doesn't make you miss out on anything. You get the same package in all cases.
(this post used to be directed towards a particular news post, but it has since been corrected, so I will leave this here as a general note)
While it's nice that there are emu sites spreading the news, it is really better when they do some basic research and fact checking instead of posting mere assumptions that only cause confusion.
|3 comments (last by Simply) | Post a comment|
Opening to the outer world
Jun 20th 2017, by Arisotura
If you have followed melonDS from the beginning, you'd know that wifi was one of the goals. And well, it's getting there.
The first melonDS release, 0.1, already included some wifi code, but it was a very minimalistic stub. The point was merely to allow games to get past wifi initialization successfully. And it even failed at that due to a bug.
Chocolate waffles to you if you can locate the bug, by the way ;)
But well, at that stage, the focus wasn't much on wifi.
It was eventually fixed in 0.2, and some functionality was added, but it still didn't do much at all. Games finally got past wifi initialization, but that was about it.
It wasn't until 0.3 that some serious work was done. With the emulator core getting more robust, I could try going for the wifi quest again. Not that 0.3 went far at all -- it merely allowed players to see eachother, but it wasn't possible to actually connect. But it was something, and infrastructure for sending and receiving packets was in place and working, as well as a good chunk of the wifi hardware functionality.
You may already know how it went back in the DeSmuME days. As far as local multiplayer was concerned, I kept hitting a wall. Couldn't get it working, no matter how hard I tried. WFC is a separate issue.
It didn't help drive motivation knowing that my work was doomed to stay locked behind a permanent EXPERIMENTAL_WIFI wall, requiring a custom wifi-enabled build, and that the DeSmuME team's public attitude is to sweep wifi under the carpet and pretend it doesn't exist, but the main issue was the lack of documentation as far as local multiplayer is concerned.
The DS wifi hardware isn't a simple, standard transceiver. It is a custom, proprietary wifi system made by Nintendo for their purposes. It has special features to assist local multiplay communication at a fast rate.
... read more
|12 comments (last by lewis28042) | Post a comment|
So there it is, melonDS 0.3
Jun 4th 2017, by Arisotura
So what's new in this version?
A bunch of bugfixes. This version has better compatibility than the previous one.
This includes graphical glitches ranging from UI elements folding on themselves to motion blur filters becoming acid trips, or your TV decoder breaking.
But also, more evil bugs. As stated in previous posts, booting your game from the firmware is no longer a gamble, it should be stable all the time now. An amusing side note on that bug, it has existed since melonDS 0.1, but in that version, the RTC returned a hardcoded time, so the bug would always behave the same (some games worked, others not). melonDS 0.2 started using the system time, which is what introduced the randomness.
The 3D renderer got one-upped too. Now it runs on a separate thread, which gives a pretty nice speed boost on multicore CPUs. This is optional, so if it causes issues or slows things down, you can disable it and the renderer will work mostly like before.
When I had to implement the less interesting aspects of this (controlling the 3D renderer thread), I procrastinated and implemented 3D features instead. Like fog or edge marking. You can see them demonstrated in the screenshots above.
Then I went back and finished the threading. I'm not a big fan of threaded code, but it seems to be completely stable.
However, resetting or loading a new game is still not completely stable, it has a chance of freezing. Oh and the UI still sucks. I plan to finally get at the UI shit for 0.4, and I want to ditch wxWidgets, so I don't really feel like pouring a lot of time into the current UI.
... read more
|3 comments (last by greenDarkness) | Post a comment|
May 24th 2017, by Arisotura
In the previous post, I said I wanted to run the 3D renderer on a separate thread. Well, we're going to see how all that works in detail.
Ever since 3D rendering was added into melonDS, it's been one of the bottlenecks whenever games use it. On the other hand, 2D rendering, while not being very well optimized, doesn't make for a big performance hit.
2D rendering isn't very expensive or difficult though -- the 2D renderers are oldschool tile engines, essentially drawing raster graphics onscreen at the specified coordinates, optionally with a bunch of fancy effects, but nothing too complex. In comparison, the 3D renderer is a full-fledged 3D GPU. It basically turns a bunch of polygons defined in 3D space, into a 2D representation that is then passed to the main 2D renderer and composited mostly like a regular 2D layer.
Transformations by various matrices, culling, clipping, viewport transform, rasterization with perspective-correct interpolation... it's a bunch of work.
The approach originally taken was to render a whole 3D frame upon scanline 215. I'm not sure whether rendering should start upon scanline 214 or 215 (GBAtek says it starts "48 scanlines in advance"), but melonDS starts at 215.
Which basically meant that the emulator had to wait until the whole 3D frame was rendered before doing anything else.
However, in emulation, you can't just throw everything on separate threads. Considering a component, whether you can put it on a separate thread depends on how tightly it is synchronized to other components.
This excellent article from byuu explains well how all this works.
In the case of our DS 3D renderer, threading is feasible because tight synchronization isn't required. Once the renderer starts rendering, you can't alter its state, the polygon and vertex lists are double-buffered and all the other important registers are latched. The only thing you can do is change VRAM mapping, but I have yet to come across a game that pulls stunts like swapping texture banks mid-frame.
... read more
|4 comments (last by Nintendo Maniac 64) | Post a comment|
Slicing the melons!
May 10th 2017, by Arisotura
So here are the two main goals for melonDS 0.3: threading the 3D renderer, and starting work on wifi connectivity.
The first goal basically aims at running the 3D renderer in parallel with the rest of the emulator. On the hardware, the renderer's state can't be altered while it is rendering, so the timing doesn't have to be precise, and we can use it to our advantage. As the current 3D renderer is a bottleneck, threading it should give a nice speed boost for multi-core CPUs (which are quite the norm nowadays).
The second goal doesn't mean wifi will work, but hey, we need to start somewhere.
Well actually wifi emulation has already been upped a notch compared to 0.2. The wifi RAM and associated registers are functional, as well as most of the timers. What remains to be done is functionality for sending/receiving packets. Power management and specific multiplayer features also need proper investigation. Then we have things like the RF and BB chips, which will likely never be fully emulated since they control very low-level aspects of wifi, like "how much energy should it take to consider we're receiving data".
So where does this get us? I have tested Pictochat and NSMB multiplayer, and in both cases, the host sets up a beacon and attempts to send it regularly, which is a good sign.
(The beacon is a packet regularly sent by wifi access points to advertise their presence. Since the DS doesn't support ad-hoc communication, multiplayer games use a similar scheme to communicate, typically with the first player acting as a host and other players being clients.)
Anyway, don't get too hyped over this, there's nothing too new here. DeSmuME and NO$GBA both get atleast this far if not further.
In the meantime, I've been implementing another obscure feature of the DS: writable VCount.
Old consoles typically have a register that reflects which scanline is being drawn onscreen. There are various names it can be called (LY on the GameBoy, VCOUNT on the GBA/DS), but it's essentially the same thing.
... read more
|1 comment (by Nintendo Maniac 64) | Post a comment|