Home | Downloads | Screenshots | Forums | Source code | RSS | Donate |
Register | Log in |
< melonDS 0.8.3melonDSi beta release > |
2D accuracy: it's a rabbit hole too Sep 14th 2019, by Arisotura |
Yeah. I've been wanting to fix mosaic support in melonDS, and, well, got sidetracked (I know I still have to release the JIT and DSi betas). Anyway, mosaic is a typical feature of old consoles with 2D engines, including the DS. It basically applies a pixelation effect to graphics, as shown here: The basic idea is that the screen is split in a grid, whose dimensions are variable (configured by register 0x0400x04C on the DS). For each 'cell' in the grid, all the pixels are colored the same as the first (top-left) pixel. In reality, it's a bit more complex, as on the DS the effect can be applied per-layer and per-sprite, and you can even specify different grid sizes for BG layers and sprites, but fundamentally it's more or less the same thing, it pixelates shit. Sounds simple enough, right? It's a bit tricky to implement when you're trying to write a performant renderer, though. Which is more or less why blargSNES never supported it. As far as melonDS is concerned, mosaic was implemented in version 0.5, but (among other silly bugs) it never worked quite right as far as sprites were concerned, especially when those use rotation/scaling. But, at the time, I didn't do much past the original implementation, mostly because I don't know of a lot of games that use the mosaic effect. The lack of test cases meant it stayed supbar. Until, well, now. First thing to do is to write some test cases for sprite mosaic. BG mosaic seems quite simple, even though I would still have to probe it extensively for edge cases, but sprite mosaic is a bit more oddball, as seen here: Those snapshots were taken from Grey, my capture-card DS. This isn't some weird buggy emulator, sprite mosaic really is that weird. The sprite being mosaic'd is a simple ball sprite. The cyan sprite behind doesn't have mosaic applied to it, but both share the same size and rotscale parameters. The sprites on the left have double-size mode enabled, which merely doubles the bounding box of rotscaled sprites. I have yet to work out all the oddities, but, from what I have observed, it seems that sprite mosaic doesn't work as we thought. If vertical mosaic is simply done by adjusting the source Y coordinate when rendering BG layers or sprites, horizontal mosaic is a different topic. As far as sprites are concerned: * horizontal mosaic is restrained to the sprite's bounding box (vertical mosaic is too, but only in one direction) * seeing how it is affected by the presence of neighbor sprites, horizontal mosaic seems to be applied after all the sprites are rendered * it seems to keep track of which pixels belong to each sprite, even when said pixels are transparent As of now, none of the existing DS emulators get sprite mosaic right. Probably, none of the GBA emulators get it right either, since the GBA uses a similar renderer, and it doesn't look like anybody has ever figured out the mystery of sprite mosaic. I wanted to be able to check my mosaic implementation against hardware for correctness in many situations, to make sure I'd gotten the logic right. But constantly dumping frames from Grey and hand-comparing them against melonDS would be tedious. I wanted to have a better tool. So, I set to work. I opened ds_capture.exe in IDA, opened up the Linux DS-capture code example and WinUSB documentation, and set to work. And, in one evening, MelonCap was born. This is pretty simple. Left screen is the output from melonDS, middle is what is captured from Grey, right is a color-coded visualization of the differences. The precision isn't exactly optimal though: melonDS outputs RGB666 color, like the DS does, but the capture card degrades it to RGB565 due to technical constraints. Well, this is atleast better than RGB555. This is pretty much made for graphical testing in specific use cases, as there's no synchronization mechanism, one has to ensure that both melonDS and the DS are rendering the same things. Anyway, the example in the screenshot above shows something interesting. There's been all that effort put towards pixel-perfect 3D, but our 2D engine isn't pixel-perfect (neither is the 3D one, but... yeah). We figured pixel perfection with the 2D engine would be a given, and, yet... here we are. The bottom screen has BLDCNT configured so that all layers/sprites will be dimmed, with BLDY=1. This is hardly noticeable, and is likely an oversight. However, the colors generated by melonDS in this situation don't quite match hardware output. The function for the brightness-down effect is described by GBAtek as: out = in - ((in * EVY) / 16);
However, a quick hardware test tends to show that the actual function is:out = in - (((in * EVY) + 7) / 16);
There's probably more of this shit everywhere, so the 2D engine will have to be heavily tested for accuracy. Fun shit ahead.
|
32 comments have been posted. |
< melonDS 0.8.3melonDSi beta release > |
Pages:123 |
MelonMan says: Oct 9th 2019 |
Any news when the DSi and JIT betas will be coming out? I've compiled the DSi branch but I have no clue how to obtain initmem7.bin/initmem9.bin as I don't have a DSi unfortunately. It would be nice if melonDS had its own wiki page where the whole "melon" community could edit and create pages (such as game compatibility and technical insights). |
MelonMan says: Oct 9th 2019 |
* And trying to boot DS firmware results in "unknown arm9 read32". Lots of them. |
Pages:123 |