|Home | Downloads | Screenshots | Forums | Source code | RSS | Donate|
|Register | Log in|
melonDS aims at providing fast and accurate Nintendo DS emulation. While it is still a work in progress, it has a pretty solid set of features:
• Nearly complete core (CPU, video, audio, ...)
• JIT recompiler for fast emulation
• OpenGL renderer, 3D upscaling
• RTC, microphone, lid close/open
• Joystick support
• Various display position/sizing/rotation modes
• (WIP) Wifi: local multiplayer, online connectivity
• (WIP) DSi emulation
• (WIP) GBA slot add-ons
• and more are planned!
If you're running into trouble: Howto/FAQ
The local multiplayer saga, ep 4
Aug 17th 2022, by Arisotura
If you happen to remember the previous episode, you'd know I'd ran into an issue caused by short CMD frames, as melonDS was erroneously replying to these with long replies. In that situation, the hardware skips the reply and sends a default empty reply, and I had yet to implement that feature properly.
So I did.
Except I still had data loss problems and random hangs in Pictochat.
I ran several hardware tests to make sure I wasn't missing any detail of this feature, and all seemed correct.
So I turned to debugging Pictochat. I noticed that when the client was getting stuck, it just stopped sending reply frames entirely. I backtracked and backtracked to find out why it was doing that, and finally found the cause. It was quite stupid.
Basically, when the DS sends a reply frame, it marks the previously sent frame by changing the first byte of its header to 0x01. All fine and dandy. melonDS of course does the same thing.
Except that when I added support for substituting a frame with a default-empty frame, I copypasted some code without paying enough attention to what it did. And that code was setting the internal reply frame address to zero, which caused the above frame header manipulation to fail unless the previous frame happened to be at address zero (basically, the beginning of the wifi RAM).
After fixing this oversight, I was rewarded with a perfectly stable and smooth connection. No hiccups, no data loss, no hanging. I didn't even see the host try to retransmit any frames.
... read more
|13 comments (last by Cauyoken190) | Post a comment|
The local multiplayer saga, ep 3
Aug 16th 2022, by Arisotura
From the previous post:
However, there is still data loss in the client->host direction, which I need to investigate further.
So I've been doing exactly that. I'm not done yet, because the DS wifi is a rabbit hole, so many little details everywhere and especially in the local-multiplayer specific features.
If you have messed with wifi in melonDS before, you might have seen this message appear in the console:
wifi: !! unusual TXSLOT_CMD bits set C000
What is this about? The value for TXSLOT_CMD has two known parts. Bits 0-11 are the address of the CMD frame, and bit 15 tells whether the CMD slot is enabled. The rest is undocumented as of now.
In this situation, the game is setting bit 14, which prevents the hardware from automatically filling in the CMD frame's sequence number. This feature comes in handy if the host needs to retransmit a CMD frame for whatever reasons (for example, if some clients failed to respond). All in all, nothing too difficult to deal with.
Except implementing it in melonDS worsened the problem of client->host data loss in Pictochat. So I just ignored that feature, which made the transfers work nearly perfectly (albeit with some apparent lag). But you know our standards: that's not correct emulation, and also more likely to lead to other problems.
So I investigated the data flow. There are a few things of note in the Pictochat data flow:
* The host sends a CMD frame every 4 milliseconds. Each frame can be addressed to a maximum of 3 clients. Thus, the host needs 5 frames to poll every possible client. This is probably done to avoid monopolizing the wifi channel too much.
* The client, when receiving a CMD frame not addressed to it, will interact with the unknown hardware registers 0x244 and 0x228. Register 0x244, in this case, seems to be used to inhibit the transfer of a reply frame, which I'm not sure why they do it when no reply would be sent anyway. I don't know what register 0x228 does, I haven't observed any effects in my tests. Over all, this part doesn't seem very important.
... read more
|4 comments (last by mrjfilippo) | Post a comment|
The local multiplayer saga, ep 2
Aug 5th 2022, by Arisotura
Slowly but steadily, I'm working on it. For now, I'm keeping my work private, so I'm not bothered by people wanting to try an unfinished branch, reporting issues with it, etc.
We assume here that you're familiar with local multiplayer terms. If you're not: read this.
I introduced a crude synchronization mechanism where the host of a local multiplayer game can instruct clients to stay in sync. When a client connects, the host sends its USCOUNTER (the wifi system's microsecond counter) value to that client, which can then compare that to its own USCOUNTER value: the point a connection is established is considered the reference point, and the client will then wait for the host to allow it to run, so it doesn't get too far ahead or behind.
Thus, the host can enforce sync (and also wait for clients to have caught up) before sending a CMD frame to its clients, thus ensuring that everybody is at the same point at that time. It can then send its CMD frame and allow clients to run ahead for a given amount of time that covers the entire MP exchange process.
The results aren't perfect, but they are somewhat promising.
For example, Pictochat doesn't seem to get stuck trying to send messages. I have only tested with two instances for now, but they seem to stay in sync fine.
However, there is still data loss in the client->host direction, which I need to investigate further.
I suspect there might be issues with ack frames being received too late. I intend to just fake them, to simplify things and reduce the amount of data being transferred. I made a quick attempt at that yesterday, but so far it's not working as intended.
It may also be caused by lacking emulation of the error handling processes in hardware (like automatically resending the CMD frame if some clients failed to respond, for example). I will have to do some more reverse-engineering to determine how that works in detail.
... read more
|11 comments (last by MPS64) | Post a comment|
Plans for local multiplayer
Jul 19th 2022, by Arisotura
I know I haven't been active a lot lately, the usual.
Well, I tried looking into the DSi sound app, and found that it crashes due to a NULL access. I tried debugging that, but it seems to be some weird timing problem and I don't know why that crash doesn't happen on hardware. This will need further investigation.
Anyway, local multiplayer.
It's one of the big things to take care of, now. We have been mostly putting it aside over time, favoring various popular requests, quality of life improvements, and fixes to DSi emulation. But we can't keep pushing it away like that. We have decided that improved local multiplayer is a must-have for melonDS 1.0, and we aren't going to keep making 0.9.247 type releases forever.
(besides, 0.9.x releases aren't very pleasant, for the same reason why I don't like $29.99 type prices: 9 is brown)
Anyway, I brainstormed some ideas for reliable local multiplayer. I have already explained before why local multiplayer is so finicky to implement, but the basic story is that we can't just run two melonDS instances and have them hurl packets at eachother and pray that things will work out. You might already know that we keep telling people to disable the framerate limiter if trying local multiplayer, and that's linked to this too.
We need a smarter mechanism for synchronizing melonDS instances taking part in local multiplayer. I have some ideas in mind for this, but I have to see how well they will translate to reality. I'm concerned about the performance implications this could have.
If this is successful, there are other possible quality of life improvements that relate to local multiplayer. For example, how to deal with user input when multiple melonDS instances are running on the same machine? You might want them to have different input mappings, but how do we deal with that without making things too complicated?
The craziest thing to achieve would be netplay, akin to Citra. Well, of course, there is no chance local multiplayer could work over the internet, but there are probably ways around this; we can look into how popular emulators handle netplay.
Oh well, we'll see how this goes, I guess.
|42 comments (last by Naptime) | Post a comment|
Long time no news
May 28th 2022, by Arisotura
I'm sorry, there just hasn't been a whole lot of fun new things to talk about these days.
On my side, it's a mix of the usual, ADHD, depression, ... I realize I have mostly been pushing these issues aside, but ignoring them only works for so long, so I'm in the process of getting professional help.
I also started a new job a few weeks ago, so it takes a while to get into it and all. I hope this will work out, especially as my ADHD is getting in the way there too, and the earliest appointment I could get for a diagnosis is in February 2023.
|65 comments (last by Ihatethecollege) | Post a comment|
Opening your eyes to the world
Apr 17th 2022, by Arisotura
I haven't been very active these days, mostly real life getting in the way, as usual. Anyway, I have been thinking of cool things I could work on for melonDS. I have some ideas in mind regarding input, like supporting multi-touch and other fun touchscreen-related features, but lately I felt like working on some actual emulation, especially in the DSi field. It's well known that DSi emulation in melonDS needs more love.
I was thinking of implementing things like SoundEx and microphone support, but Generic said he was going to implement that, so I'm letting him having fun there. Instead, I went for improving camera emulation. After all, cameras are the main thing DSi-exclusive games make use of, so DSi emulation with no camera support just feels incomplete.
melonDS 0.9.4 already has some very basic camera emulation, but it basically just does the bare minimum to pass the camera init sequence, and then returns a fixed stripe pattern (which is basically just the picture data register returning a fixed value). Nothing exciting.
For example, you can open the DSi camera app and get to the actual camera part of it, but trying to take a picture will result in a system error. Reason for this is that the camera can be set to output at multiple resolutions. It has two modes of operation, named 'preview' and 'capture', which makes sense in applications like digital cameras: preview mode would provide a low-res preview of what the camera sees, that can be displayed on a built-in screen, while capture mode would provide a full-res picture that can be saved. The DSi camera lets you configure two contexts, each with their output resolution, image format, and various other options (for example, flipping the picture...).
So I first had to add support for these modes of operation. I first implemented the registers necessary to handle the camera mode/context switch. But, of course this wasn't enough. The stub in place for picture transfer assumed a resolution of 256x192, but in this case, the resolution is changed to 640x480. This also means that the DSi camera app expects more picture data to come, and it will softlock if there isn't enough data incoming.
This is where my camera test homebrew came in handy. I modified it so that I could do things like switching between the front and back cameras, switch between preview and capture modes, and even use the picture cropping feature to view different areas of the picture in 640x480 mode (as obviously it wouldn't fit onscreen). Doing this let me get a good grasp on how these features were supposed to work.
Then I felt confident implementing all that into melonDS.
This is a preexisting still picture, not actual camera input. But regardless, we have working camera emulation now, and this is half the battle. The other half would be reading picture data from sources like an actual camera, feeding it into the emulator, and integrating all that into the UI.
... read more
|26 comments (last by Siyar16) | Post a comment|
melonDS has been acquired by Meta
Apr 1st 2022, by Arisotura
EDIT - this post is an April Fools joke (in case that wasn't obvious)
A while ago we had an... unusual visit at the melonDS HQ: Mark Zuckerberg, no less. Zuck stated that he had always been a great fan of emulation, and that he loved our project greatly.
He offered us $324 million for the melonDS company, including both the HQ and the Melon Factory of Kuribo64.
An offer we could hardly refuse. Zuck is a very cool guy, and we greatly enjoyed the time spent in his company at the HQ. Plus, he's good at karaoke, so that will definitely make for some fun nights!
On more practical terms: this means lots of new exciting developments for melonDS.
For example, one of the new ideas is selling NFTs of the best melonDS screenshots. That is an obvious one, but not the only one at all.
There are also many possibilities opened by Metaverse integration: melonDS could be made compatible with game cartridges you would buy in the Metaverse, and you would then get to enjoy your favorite DS classics in VR. Who wouldn't love that?
melonDS will also become smarter, for an enhanced user experience. We are thinking about keeping a database of games, so melonDS can detect which game it is running, and offer ads related to that game. That is a start, but with AI we might be able to take this even further and offer the most relevant ads an emulator has ever offered.
Harnessing the power of a cloud could let us determine for you what the best emulator settings are, so you never ever have to mess with settings again.
... read more
|20 comments (last by LovelyDumpling) | Post a comment|
melonDS 0.9.4 is out!
Mar 8th 2022, by Arisotura
I know this has been a long wait, but finally, here it is: melonDS 0.9.4 is out.
It has been numbered this way because 1.0 is going to be a milestone release: we want to get local multiplayer stable for 1.0.
Anyway, what's new in melonDS 0.9.4? A bunch of improvements that should make things easier for the average end user.
Most notably, in DS mode, melonDS no longer requires you to obtain BIOS/firmware files. You can always supply these if you have them around, for a more accurate experience, but if you don't, melonDS will default to using DraStic's FreeBIOS clones. Similarly, a barebones firmware with default configuration data will be generated.
However, for now, DSi mode still requires you to provide BIOS/firmware/NAND dumps. We are studying ways to get around this requirement, but it's going to take us some work.
There is also a new dialog for firmware settings, which allows you to override the firmware settings with your own. This is intended for when using the default internal firmware, but it can also override the settings in an external firmware, and it even works in DSi mode.
DLDI support has also been upgraded: it is now possible to have melonDS generate a SD image for DLDI on its own, and it is also possible to have said SD image synced to a folder on your computer. This means that you can place files in that folder and they will show up in the emulated DLDI SD card, and conversely, any changes made to the emulated SD card will be reflected to the folder on your hard drive.
While this has been tested extensively, we still recommend that you keep a backup of any folder you intend to use with this, just in case. You can also set your DLDI SD card to be read-only if you don't need it to be writable.
All of this is also supported for the DSi SD card in DSi mode.
... read more
|46 comments (last by Link1448) | Post a comment|
Server move complete!
Jan 13th 2022, by Arisotura
Finally. We have been moving Kuribo64 to a new server that has better specs, is more modern, more secure, cleaner, and overall better.
Everything seems to be working smoothly now, but let us know asap if anything goes wrong.
There are also some further changes planned, like setting up HTTPS.
|10 comments (last by Rayyan) | Post a comment|
Custom path support has been merged
Jan 9th 2022, by Arisotura
As title says.
This also comes with some extra features. For comparison, the File menu in melonDS 0.9.3, and the new File menu:
First of all, the 'Open ROM inside archive' option has been merged with 'Open ROM', to declutter the menu and make things more intuitive. The file picker dialog just lets you pick either a ROM file or an archive, and in the latter case, it asks you which file you want to open from the archive.
When opening a ROM from an archive, the recent ROM menu remembers the archive file but also which ROM you picked inside it. Similarly, you can now pass a ROM inside an archive to the command line, like so:
As I wanted to make the GBA ROM/addon feature more obvious, it has been decoupled from the regular 'Open ROM' feature. Previously, you had to open your GBA ROM before opening your NDS ROM, but it wasn't obvious at all that the feature existed or how it worked. Now, the separate menus should make this more obvious.
The way DS ROMs are handled has been revamped in a similar fashion. Basically:
* 'Open ROM' loads a DS ROM and starts running it, resetting emulation if another ROM was loaded previously, basically retaining its existing behavior.
* Under the DS slot section, 'Insert cart' will load a DS ROM, and that's it. Just like inserting a cartridge in a DS. The current cart, if any, will be ejected prior. This makes it possible to hotswap carts while running a game or the DS/DSi menu. Similarly, you guess what 'Eject cart' is for.
* The GBA slot section works in much the same way. You can choose to either insert a ROM cart, mimicking the presence of a GBA game cart for the DS games that can sense that, or insert an add-on cart, like for example the memory expansion cart which the DS browser uses. Note that melonDS does not support running GBA games.
... read more
|16 comments (last by Rayyan) | Post a comment|