|Home | Downloads | Screenshots | Forums | Source code | RSS|
melonDS aims at providing fast and accurate Nintendo DS emulation. While it is still a work in progress, it has a pretty solid set of features:
• Nearly complete core (CPU, video, audio, ...)
• OpenGL renderer, 3D upscaling
• RTC, microphone, lid close/open
• Joystick support
• Various display position/sizing/rotation modes
• (WIP) Wifi: local multiplayer, online connectivity
• and more are planned!
If you're running into trouble: Howto/FAQ
If you're feeling generous: melonDS Patreon
A lot closer to a finished product
Feb 6th 2017, by Arisotura
Even if still very far.
After a while, melonDS finally boots commercial games. Among my small game library, the compatibility rate is encouraging, even. Here are a few screenshots, for example:
Getting there took a while of implementing new features, but also bashing my head against obscure bugs that often turn out to come from silly little things.
As an example, a bug that prevented games from booting.
On ARMv4/v5, the LDR opcode has the particularity that if you read from an address that isn't word-aligned, it aligns the address, and rotates the word it read so that the LSB is the byte pointed by the original address. In melonDS, it was implemented the following way:
u32 val = ROR(cpu->DataRead32(offset), ((offset&0x3)<<3));
At first glance, looks alright, doesn't it? Except ROR() is a macro, defined as follows:
#define ROR(x, n) (((x) >> (n)) | ((x) << (32-(n))))
This basically ends up calling cpu->DataRead32() twice. This isn't a big deal when reading from RAM, it only wastes some CPU time, but the bug goes unnoticed. However, it has nasty side-effects when reading from I/O registers like the IPC FIFO.
Next up, aside from GPU-related work, were features like touchscreen or save memory.
... read more
|6 comments (last by Arisotura) | Post a comment|
Jan 23rd 2017, by Arisotura
melonDS has progressed nicely since the last post. To give you an idea:
It's got some graphics capabilities, even though those are quite limited. Rotated/scaled sprites, like those used for the clock up there, gave me some trouble, but I eventually got it working.
Speaking of the clock, it's frozen in time. I had to implement the RTC to get the firmware to actually boot instead of constantly entering "please enter time/date" mode, but for now, I hardcoded the time/date. The RTC is real fun to work with btw-- DS software talks to it by bitbanging a GPIO register. From the emulator's point of view, you get a series of zeros and ones which you must put back together to get data you can work with.
I also implemented proper-ish support for the DS cart hardware. This is quite the fun too. There's an initialization sequence done by the BIOS, and two different encryption methods are used. The BIOS starts by retrieving the ROM header and chip ID, then switches to Key1-encrypted command mode and retrieves the secure area (a protected part of the ROM not readable via the normal read command), and finally switches to Key2-encrypted command mode, under which the game will operate.
It is also worth noting that on actual carts, the first 2KB of the secure area are Key1 encrypted. The first 8 bytes are a double-encrypted identifier (string 'encryObj') that is used by the BIOS to verify whether the decryption was successful. However, all the DS ROM dumps out there have that 2KB block decrypted. Thus, we need to re-encrypt it for it to be loaded successfully.
Getting Key1 to work took a while (and uncovered a bug in the CPU core). Key1 is based on Blowfish and is the most complicated encryption algorithm used. Key2 is based on a XOR stream generated from two 39-bit registers, but it can be ignored, it is entirely implemented in hardware.
The really hacky part in the current implementation is how cart DMA is implemented. Cart DMA basically works by automatically transferring a word from the cart data output register to memory as soon as there's data ready. The DMA engine doesn't know how long the transfer is, it only knows to wait until there's data available, transfer it, then repeat.
When you take the lazy approach of making cart reads return data instantly, you may run into trouble when implementing cart DMA properly. A read from the cart data output register would advance the read pointer, and if DMA is enabled, perform a DMA transfer, which would trigger another read, and so on until the recursion overflows the stack.
... read more
|3 comments (last by Dean) | Post a comment|
So what's melonDS?
Jan 17th 2017, by Arisotura
melonDS is a new emulator project. My goals for it are to do things right and fast. Time will tell how far we can get in that direction.
If you know me, I'm not new in the emulation scene. I'm responsible for lolSNES/blargSNES, among others. I'm not new in the DS scene either, I worked a lot on DeSmuME back in the days. Why I'm straying away from DeSmuME is not something I will get into here.
So here I am, writing my own emulator for the second time. The hardest part in starting an emulator project from zero is managing to build something that resembles an emulator. It takes a fair amount of work before you can start getting results.
To this day, melonDS has gotten over the initial stage and does give some results. Nothing actually works aside from the very simple ARMWrestler CPU test, but hey, it's a start. melonDS has a 'good enough' subset of the ARM instruction set implemented, as well as a few hardware features, so getting things to run is mostly a matter of implementing the rest of the DS hardware.
One thing I want to do is being able to boot from the BIOS, like an actual DS. I was unable to get it to work in DeSmuME back then, but manually loading a DS firmware and booting it (thus skipping the BIOS) did work.
The progress of melonDS in regard to this is encouraging. The BIOS loads the firmware into memory and boots it. The firmware gets to the point where it tries to use the IPC FIFO, which I haven't implemented yet. Interesting things ahead!
Of course, melonDS will later have the option to boot a game directly, like all the emulators out there do. But for the sake of accuracy, I want to be able to boot from the BIOS.
The holy grail would be wifi emulation, especially local multiplayer, which I could never get working in DeSmuME. Time will tell if that goal is achievable.
|No comments yet | Post a comment|
melonDS dev blog
Jun 20th 2016, by Arisotura
|I will use this blog to post about the development of melonDS, my DS emulator project. I expect it to be lots of fun.|
|3 comments (last by Asbel_Lhant) | Post a comment|